cosmetic plastic tube technical instruction (二)

3,plastic tube specifications and capacities.
remark:
1>,plastic tube diameter is set,length can be adjusted.
2>,specifications are for reference only,and customer sizes are available.
3>,Above tube length are the testing result after the sealing,if customer seals the tube by himself,the tube length should increase 10-20mm.



4, plastic tube printing area.

Remark:
1>,Product may shrink by 2.0%following production.
2>,1.5mm must be reserved for circumference printing.
3>,Standard size for eye mark is 2.0mm×7.0mm,othersize are available on request.
4>,No print area next to the tube shoulder is 2mm,noprint area on the tube tall is 5mm,they can be adjusted according to the requirement.